|
|
Popular keywords
This item is no longer available. Below please see similar items.
This item is no longer available.
Hobbymat MD65 Lathe and BFE65 Mill in very nice condition with drill chuck, Milling collet holder with 5 Collets all spare gears for setting different lathe speeds between 250and 2000 RPM, Milling table with vice, 3 jaw chuck with key, spare set of reversible jaws for 3 jaw chuck, T slots and hold down bolts for milling table.
The BFE65 milling attachment fits to the bed of the lathe to produce a versatile
mill/drill using the cross slide as an XY table. A special milling table that
replaces the topslide is provided and can be seen in one of the photographs
above. It is also possibile to buy an XY table for the BFE65 to make a stand
alone milling machine.
The Hobbymat MD65 is a precision screwcutting lathe and is supplied with gears
for both metric and imperial threads. The electrics are built in and the motor
can be reversed. As the chuck is bolted to the spindle, there is no danger of
the chuck unwinding itself in reverse as can happen with lathes from Myford
and Boxford. The spindle is bored straight through, with a No2 Morse Taper and
can pass work of up to 12mm diameter.
Made originally in what used to be "East Germany", by VEB
Prazisionsdrehmaschinen (now, Unitech) and marketed in the UK as the
HOBBYMAT MD 65, in the USA as part of the Prazimat range (and in parts
of Europe as the Saupe & Sohn), this neat little lathe of 65 mm
(2.6") centre height by 300 mm (12") between centres, found great
favour amongst the makers of smaller models, jewellers and watch
repairers
SHIPPING CALCULATOR IS AN ESTIMATE ONLY!!!! I WILL PROVIDE AN ACTUAL SHIPPING COST AFTER CLOSE OF AUCTION IN CASE BIDDERS WANT EXTRA PICTURE OR ITEM IS PICKED UP LOCALLY. I DO NOT ADD ANY FEES FOR BOXING OR EXTRAS ON TOP OF ACTUAL SHIPPING CHARGES.
|
|
|